The 1-gallon Spray & Forget House & Deck Outdoor Cleaner with Nested Trigger Spray Bottle is your outdoor home improvement solution. Able to clean areas of 150-200 square feet, this convenient stain remover treatment works wonders as a multi surface mold and mildew stain cleaner. This powerful spray bottle cleaner works to clean brick, walls, decks, fences, driveways, walkways, siding and stucco. Enjoy outdoor entertaining? This is your outdoor patio cleaning solution. To use this outdoor cleaner hose sprayer, follow all directions carefully. First make sure that the surface to be treated is dry before application. Attach garden hose and fully turn on water source. Apply a thorough coat of Spray & Forget to affected areas to spray away stains, keeping the surface wet for as long as possible. Do not rinse. Once surface is clean, apply Spray & Forget every 24-36 months at the first sight of new staining. Keeps cleaning long after application! Keep out of reach of children. Read and follow all label directions.
DIRECTIONS: Check your weather forecast and ensure there is no rainfall, snow or precipitation predicted for at least the first 12 hours after application. Make sure that surface to be treated is dry. Remove yellow sticker from yellow cap and flip off the top of the cap exposing the hose connection. Firmly insert black hose connector in to the lid cap . Shake bottle lightly. Apply a thorough coat of cleaner to all affected areas, keeping the surface wet for as long as possible. DO NOT RINSE. Green stains will disappear in 1-3 days. Black streaks and stains on non-roof surfaces will continue to disappear with subsequent rainfall over the next 1-8 weeks. A second application may be necessary for extremely affected areas but only after at least 1 month. Rapid Results can be achieved with additional time and work with one of the following methods. ALTERNATIVE Method A: 24 hours after applying Spray & Forget™ as directed above, pressure wash the surface using a wide fan out tip with low to medium pressure. NOTE: High pressure washing can damage many surfaces if not used properly. ALTERNATIVE Method B: Working from an outside corner of the surface to be treated, apply in smaller sections and brush the surface with a soft to medium bristled brush while the surface is still wet. Rinse the brushed surface with a hose and spray nozzle. Repeat as necessary until the entire surface is clean.
